||
x
x

Home Product Center Guidance

Powder Metallurgy HSS

Powder metallurgy tool materials eliminate traditional metallurgical chemical composition segregation, with uniform and fine distribution of carbides and outstanding performance, making them high-end products in tool materials.

Mfrs:HEYE Special Steel Co.,Ltd.

Sales manager:Fan Mancang

E-mail:fmc@hss-cn.com

Product manager:Zhang Beibei

E-mail:hss_zhangbeibei@sina.com

Made in:Hebei,China

Tel:0311-88382262

Fax:0311-88382288

Tel:0311-88382066

Fax:0311-88382027

Application domain:Cutting tool

Product introductionProduct specificationsOnline consulting Product information download

HEYE HOP series products are powder metallurgically produced high speed steels featured by its fine and evenly distributed carbides particles in the matrix. Because of its refined microstructure, HOP products are isotropic and high in  ductility, wear resistance, toughness as compared to traditional HSS. It is worth to mention that the bending strength and the toughness of PM HOP products are 50-100% better than that of normal HSS. Comparing to carbide, the PM HOP products have good machinability and grindability and are better choice for the materials of complex shaped cutting tools.

 

Many success cases for the PM HOP products used as the tool materials of large size, complex shape in automotive, aviation, aerospace, energy industries. HOP products can really be a problem solver tool materials due to its refined microstructure which cannot be matched by the traditional HSS containing a lot of irregularly distributed coarse carbides.

 

Cutting tools of PM HOPT15M materials can use higher cutting speed under dry cutting conditions with relatively satisfactory tool life. It is one of the effective method to improve the productivity and reduce the machining cost.

 

Cutting tools of PM HOP2030 materials can be used for high-speed cutting difficult to machine, such as taps, etc., and to enhance the ability of intermittent cutting, can significantly increase productivity and reduce unit processing costs.

Specification

Form Supplied

Size (mm)

Surface Condition

Round Bar

φ12-30

Black

φ30-410

Roughly Turned / Black

Bright Bar Material

φ5.0-14.5

Ground

φ12-410

Peeled

Square Bar

7.2×7.227×27

Black

Flat Bar

(3.5-40) ×(13-100)

Black / Shot Blast

(20-200) ×(40-400)

Black / Milled

Wire Rod

φ5.5-17

Black / Ground

Drawn Wire

φ0.8-14

Black / Ground

Prehardenend Bar

φ1.0-15.0

Black

Strip Material

(33-65) ×(1.5-3.0)

Black

(25-55) ×(0.65-1.80)

Polished

Sheet Material

(1.0-10) ×(500-850)

Black

Forged Product

Roundφ(50-350)×(10-300)

Black / Machined

Rectangle(20-200)×(5-80)

Welded-blank, wimble blank, roller blank, hollow broacher blank, prefabricated Shield roll ring and other extension product.

Name:* Tel: E-mail:*
Message: 
Code:Click to get verification code

Please click on the following material or product name to view or download.

 

1Flat Bar

 

2Steel Sheet

丨Legal declaration

丨Privacy protection

 Copyright 2016 by heye(Hss-Cn.com)ICP12013182
Contact

Sales hotline:

0311-88382258/2268(domestic sales)

0311-88382296/2299(International Sales)

Service hotline:

0311-88382266